Originally posted on http://www.skyandtelescope.com/astronomy-news/aas-offers-updated-advice-for-safely-viewing-the-august-21st-solar-eclipse-across-america/
In response to alarming reports of potentially unsafe eclipse viewers flooding the market as the coast-to-coast solar eclipse of August 21st draws near, the American Astronomical Society (AAS) has revised some of its safety advice to the public.
How can you tell if your “eclipse glasses” or handheld solar viewers are safe? It is no longer sufficient to look for the logo of the International Organization for Standardization (ISO) and a label indicating that the product meets the ISO 12312-2 international safety standard for filters for direct viewing of the Sun’s bright face. Why not? Because it now appears that some companies are printing the ISO logo and certification label on fake eclipse glasses and handheld solar viewers made with materials that do not block enough of the Sun’s ultraviolet, visible, and infrared radiation to make them truly safe. Some sellers are even displaying fake test results on their websites to support their bogus claim of compliance with the ISO safety standard.
Evan Zucker (left); Paul Deans / TravelQuest International (right)
Given this unfortunate situation, the only way you can be sure your solar viewer is safe is to verify that it comes from a reputable manufacturer or one of their authorized dealers. The AAS Solar Eclipse Task Force has been working diligently to compile a list of such vendors, now posted on its Reputable Vendors of Solar Filters & Viewers page. Task-force members have checked manufacturers’ ISO paperwork to make sure it is complete and that it comes from an accredited testing facility, and they’ve asked manufacturers to identify their authorized resellers and dealers to identify the source of the products they’re selling. Only when everything checks out does the AAS add a vendor to its listing.
“If we don’t list a supplier, that doesn’t mean their products are unsafe,” says AAS Press Officer and task-force representative Rick Fienberg. “It just means that we have no knowledge of them or that we haven’t convinced ourselves they’re safe.”
How can you tell if your solar viewer is NOT safe? The only thing you can see through a safe solar filter from a reputable vendor is the Sun itself. If you can see ordinary household lights through your eclipse glasses or handheld viewer, it’s no good. Safe solar filters produce a view of the Sun that is comfortably bright (like the full Moon), in focus, and surrounded by black sky. If you glance at the Sun through your solar filter and find it uncomfortably bright, out of focus, and surrounded by a murky haze, it’s no good. You should contact the seller and demand a refund or credit for return of the product, then obtain a replacement from one of the sources listed on the AAS’s reputable-vendors page.
What if you received eclipse glasses or a handheld solar viewer from a relative, friend, neighbor, or acquaintance? If that person is an amateur or professional astronomer – and astronomers have been handing out eclipse viewers like Halloween candy lately – they’re almost certainly ISO-compliant, because astronomers get their solar filters from sources they know and trust (in other words, from the ones listed on the AAS’s reputable-vendors page). Ditto for professional astronomical organizations, including college and university physics and astronomy departments, and amateur-astronomy clubs.
If you bought or were given eclipse viewers at a science museum or planetarium, or at an astronomy trade show, again you’re almost certainly in possession of ISO-compliant filters. As long as you can trace your filters to a reputable vendor or other reliable source, and as long as they have the ISO logo and a statement attesting to their ISO 12312-2 compliance, you should have nothing to worry about. What you absolutely should NOT do is search for eclipse glasses on the internet and buy whatever pops up in the ads or search results. Check the AAS list of reputable vendors and buy from one of them.
Rick Fienberg / TravelQuest International / Wilderness Travel
The AAS continues to emphasize that it is perfectly safe to look directly at the Sun during the brief total phase of the solar eclipse (“totality”), when the Moon entirely blocks the Sun’s bright face. On August 21st this will occur only within a roughly 70-mile-wide path spanning the country from Oregon to South Carolina, and only for up to 2 minutes 40 seconds. Before and after totality, or throughout the entire eclipse if you’re outside the path (in which case you’ll see only a partial eclipse, which is nowhere near as exciting or magnificent as a total one), the only safe way to look directly at the Sun is through special-purpose solar filters. These are commonly sold as paper- or plastic-framed eclipse glasses or cardboard solar viewers that you hold in your hand. Ordinary sunglasses, even very dark ones, are not safe for looking directly at the Sun; they transmit many thousands of times too much sunlight.
Here are the AAS’s instructions for the safe use of eclipse glasses and handheld solar viewers:
* Always inspect your solar filter before use; if scratched, punctured, torn, or otherwise damaged, discard it. Read and follow any instructions printed on or packaged with the filter.
* Always supervise children using solar filters.
* If you normally wear eyeglasses, keep them on. Put your eclipse glasses on over them, or hold your handheld viewer in front of them.
* Stand still and cover your eyes with your eclipse glasses or solar viewer before looking up at the bright Sun. After looking at the Sun, turn away and remove your filter – do not remove it while looking at the Sun.
* Do not look at the uneclipsed or partially eclipsed Sun through an unfiltered camera, telescope, binoculars, or other optical device.
* Similarly, do not look at the Sun through a camera, a telescope, binoculars, or any other optical device while using your eclipse glasses or handheld solar viewer – the concentrated solar rays could damage the filter and enter your eye(s), causing serious injury.
* Seek expert advice from an astronomer before using a solar filter with a camera, telescope, binoculars, or any other optical device; note that solar filters must be attached to the front of any telescope, binoculars, camera lens, or other optics.
* If you are inside the path of totality, remove your solar filter only when the Moon completely covers the Sun’s bright face and it suddenly gets quite dark. Experience totality, then, as soon as the bright Sun begins to reappear, replace your solar viewer to look at the remaining partial phases.
* Outside the path of totality, you must always use a safe solar filter to view the Sun directly.
Some eclipse glasses and solar viewers are printed with warnings stating that you shouldn’t look through them for more than 3 minutes at a time and that you should discard them if they are more than 3 years old. Such warnings are outdated and do not apply to eclipse viewers compliant with the ISO 12312-2 international safety standard, which was adopted in 2015. If your eclipse glasses or viewers are relatively new and are ISO 12312-2 compliant, you may look at the uneclipsed or partially eclipsed Sun through them for as long as you wish. Furthermore, if the filters aren’t scratched, punctured, or torn, you may reuse them indefinitely.
What about welding filters? The only ones that are safe for direct viewing of the Sun with your eyes are those of Shade 12, 13, or 14. These are much darker than the filters used for most kinds of welding. If you have an old welder’s helmet around the house and are thinking of using it to view the Sun, make sure you know the filter’s shade number. If it’s less than 12 (and it probably is), don’t even think about using it to look at the Sun. Many people find the Sun too bright even in a Shade 12 filter, and some find the Sun too dim in a Shade 14 filter – but Shade 13 filters are uncommon and can be hard to find. The AAS’s Reputable Vendors of Solar Filters & Viewers page doesn’t list any suppliers of welder’s filters, only suppliers of special-purpose filters made for viewing the Sun.
An alternative method for safe viewing of the partially eclipsed Sun is indirectly via pinhole projection. For example, cross the outstretched, slightly open fingers of one hand over the outstretched, slightly open fingers of the other, creating a waffle pattern. With your back to the Sun, look at your hands’ shadow on the ground. The little spaces between your fingers will project a grid of small images on the ground, showing the Sun as a crescent during the partial phases of the eclipse. Or just look at the shadow of a leafy tree during the partial eclipse; you’ll see the ground dappled with crescent Suns projected by the tiny spaces between the leaves.
This article originally appeared as a press release from the American Astronomical Society.
Sky & Telescope is an authorized seller of eclipse glasses!
For more information about safely viewing the eclipse, you may want to learn about how to safely view an eclipse or other low-tech eclipse viewing options.
The post AAS Offers Updated Advice for Safely Viewing the August 21st Solar Eclipse Across America appeared first on Sky & Telescope.
via Astronomy News – Sky & Telescope